spec no: dsae6954 rev no: v.3 date: nov/12/2005 page: 1 of 5 approved: j. lu checked: allen liu drawn: y.w.wang description the blue source color devices are made with ingan on sic light emitting diode. the green source color devices are made with ingan on sic light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti - electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. p/n: kpbd - 3224pbvgc blue / green attention observe precautions for handling electrostatic discharge sensitive device s 3.2x2.4mm smd chip led lamp package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .1(0.004") unless otherwise noted. 3.specifications are subject to change without notice. features 3.2x2.4mm smt led, 2.4mm thickness. low power consumption. ideal for backlight and indicator. various colors and lens types available. package : 1500pcs / reel. rohs compliant.
spec no: dsae6954 rev no: v.3 date: nov/12/2005 page: 2 of 5 approved: j. lu checked: allen liu drawn: y.w.wang selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 kpbd - 3224pbvgc blue (ingan) water clear 36 100 green (ingan) 280 600 20 electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c symbol parameter device typ. max. test conditions units peak peak wavelength blue green 468 520 nm i f =20ma d dominant wavelength blue green 470 525 nm i f =20ma ? 1/2 spectral line half - width blue green 25 38 nm i f =20ma c capacitance blue green 65 45 pf v f =0v;f=1mhz v f forward voltage blue green 3.65 3.5 4.2 4.5 v i f =20ma i r reverse current blue green 10 10 ua v r = 5v parameter blue green units power dissipation 102 105 mw dc forward current 30 30 ma peak forward current [1] 160 150 ma reverse voltage v operating/storage temperature - 40c to +85c 5 note: 1. 1/10 duty cycle, 0.1ms pulse width.
spec no: dsae6954 rev no: v.3 date: nov/12/2005 page: 3 of 5 approved: j. lu checked: allen liu drawn: y.w.wang kpbd - 3224pbvgc blue
spec no: dsae6954 rev no: v.3 date: nov/12/2005 page: 4 of 5 approved: j. lu checked: allen liu drawn: y.w.wang green
spec no: dsae6954 rev no: v.3 date: nov/12/2005 page: 5 of 5 approved: j. lu checked: allen liu drawn: y.w.wang recommended soldering pattern (units : mm ) tape specifications (units : mm ) kpbd - 3224pbvgc remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity/ luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
